How to fix Epson Stylus NX210 printer red light blinking and show the error “The printer’s ink Pads are at the end of their service life. Please contact the Epson Support” by using Epson Stylus NX210 RESSETTER and Wic Reset Key.
You have had an Epson Stylus NX210 printer in a good condition but today after turning it on to print the document, the printer doesn’t work and it also has the flashing red light problem as well as you receive an problem message on the LCD screen: “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support”, we call this error is Waste Ink Counter Overflow.
You completely fix this problem with a low fee and you don’t need to bring your Epson printer to the store, it is very expensive and time – consuming.
What is the Waste Ink Counter on Epson Stylus NX210 Printer? How can you fix?
Before you look for the reason of the Waste Ink counter on Epson Stylus NX210 printer, you have to sure that your Epson printer has this problem and also other same errors. You completely realize this error based on these signals below.
The signals of Epson Stylus NX210 printer when it has Waste Ink Counter Overflow error
Let’s check your Epson Stylus NX210 printer carefully based on these steps below:
– When the printer suddenly stops working, it may seem that your printer is having Waste Ink Counter Overflow but there are a lot of others such as paper jam.
– Make sure by checking the Epson Stylus NX210 printer’s LCD screen in case you have or you can check the error message on the computer, if you see “The Printer’s Ink Pad is at the end of its service life. Please contact Epson Support” or “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support”, your Waste Ink Counter is overflowed.
– I think you should download WIC RESET TOOL which is called Epson Stylus NX210 Resetter then read the index of the Waste Ink Counter by clicking the button “read waste counters”.
What is Epson Stylus NX210 Waste ink counter? What is Epson Stylus NX210 Waste ink pad?
Epson inkjet printers have inside a part of sponge for absorbing and collecting waste inks. It is called waste ink pad.
Ink is collected by waste ink pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs. While printhead cleaning process ink flush through printhead to waste ink pad.
So one time it can be overflowed because it could not absorb ink anymore then the ink will leak from the bottom of the Epson Stylus NX210 printer.
The printer counts how much ink flow to waste ink pad and stores this number into printer’s memory.
This number is called Protection Counter and also Waste Ink Counter.
What is Epson Stylus NX210 Waste ink counter overflow?
To prevent ink leaking outside the Epson Stylus NX210 printer from Waste ink Pad, the waste ink counter may be overflowed and printer will stop.
Full waste ink counter is 100%. Overflow means that counters values are more than 100%. If one or two counters are overflow – you can’t print – you should be RESET WASTE INK COUNTERS
After a long period of usage and also you had used it for a large quantity of printing document, the printer will leave a lot of waste ink into Waste ink pad. If you don’t care about this problem, the waste ink tray will be full then the waste ink can be overflowed.
This affects other components and can make the Epson Stylus NX210 printer be broken down. We can predict that case so Epson installed to make the Waste Ink Counter overflow soon to stop the printing procedure, this ensures that there is no waste ink which flows into the waste ink pad and prevent the waste ink from overflowing.
When one of the waste ink counters is overflowed, the printer will stop instantly. You need to clean the waste ink tray and also replace then reset Waste ink counter back to 0% to continue printing.
How to prevent the waste ink pad overflowing.
After you reset the waste ink counter back to 0% many times and the printers will go on working and let the waste ink flow into tray so the waste ink tray will be full soon and then overflow. This problem affect directly to printer so you need an useful solution to prevent the waste ink pad overflowing.
The professional method: you can create an open bottle that contains the waste ink to help it can contain more waste ink. Let’s see the picture below:
But you need to have some tools and your creativity. If you can’t do this, you can use this following way.
This way is very simple, when you reset the waste ink counter, you can dissemble the top of the waste ink tray then take the waste ink out, if you can let’s dissemble the sponge and clean it.
You also buy a new waste ink tray to replace.
The disadvantage of this way is you can forget to clean waste ink pad so the ink can be overflowed. This can be bad effect to the components of the Epson Stylus NX210.
Reset Epson Stylus NX210 printer Waste ink counter instruction
Step 1: Download Epson Stylus NX210 resetter and setup
You are able to download by click on one of the links:
– Download Epson Stylus NX210 resetter for Windows (.zip): Download here
– Download Epson Stylus NX210 resetter for Windows (.rar): Download here
– Download WIC Reset Utility for Windows (Mirror): Download here
or go to download page here: Download Epson Stylus NX210 Resetter
How to setup Epson Stylus NX210 resetter:
Step 1.1: Open Wicreset.exe file, click “Yes“, click “I accept the agreement“.
After that click “Next” to continue
Step 1.2: Now, select distination location to install Epson Stylus NX210 resetter. If you would like to select a different folder, click Browse then select a folder. If you want to install WIC Reset Utility in default location, click Next to continue
Then, click Next when “Select Start Menu Folder” window appears, if you don’t want to create a start menu folder click on “Don’t create a Start Menu folder“.
Step 1.3: Click to check “Create a desktop shortcut” then click Next to continue setup Epson Stylus NX210 resetter
Step 1.4: Click Install to continue with the Epson Stylus NX210 Resetter installation
Please wait. Setup has finished installing Epson Stylus NX210 resetter on your computer when you see the Window: “Completing the WicReset Setup Wizard“
And this is WIC Reset Tool (Epson Stylus NX210 resetter)
Step 2: Buy the WIC Reset Key
You can buy the WIC RESET KEY with Paypal, VISA, Master Card or Webmoney. ONE RESET KEY = $8.99 (One time reset only)
Step 2.1: Click here to go to Buy Page, and also visit: https://resetkey.net/buy
Step 2.2: Enter the number of keys you want to buy in to Quantity box.
Step 2.3: Click on ADD TO CART button, then click Checkout with Paypal to pay the reset key and get the reset key from your email (You will receive the reset key in less than 10 seconds).
if you pay the reset key with Webmoney, please send money to WMZ Wallet: Z230787931543 then contact us (manilacare@gmail.com) to get the reset key
Step 3: Instruction on how to reset your Epson Stylus NX210 printer’s Waste Ink Counters
Please watch this video to know how to reset your Epson Stylus NX210 printer’s Waste ink counters by using Epson Stylus NX210 resetter (WIC Reset Tool.)
If you have any problem with Epson Stylus NX210 resetter, please don’t hesitate to contact us.