In this article, we will give you the guide of resetting the waste in counter on Epson Stylus NX510 printer. You will have trouble on waste ink counter during Epson usage process and the signals that you can realize this issue easily are not working printer, the blinking red light problem and the error message on the LCD screen “The Printer’s Ink Pads are at the end of their service life”.
You have had an Epson Stylus NX510 printer in a good condition but today after turning it on to print the document, the printer doesn’t work and it also has the flashing red light error as well as you receive an error message on the LCD screen: “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support”, we call this error is Waste Ink Counter Overflow.
You completely fix this problem with a low fee and you don’t have to bring your Epson printer to the store, it is very expensive and time – consuming.
What is the Waste Ink Counter on Epson Stylus NX510 Printer? How can you fix?
As I have mentioned, you should sure your printer having the Waste Ink Counter error or not, in case your printer has this problem, let’s go on fixing it or you can call the fixing service to save your time.
How to realize the Waste Ink Counter Overflow in Epson Stylus NX510 printer
Let’s check your Epson Stylus NX510 printer carefully based on these steps below:
– When the printer suddenly stops working, it may seem that your printer is having Waste Ink Counter Overflow but there are a lot of others such as paper jam.
– Make sure by checking the Epson Stylus NX510 printer’s LCD screen in case you have and also you can check the error message on the computer, if you see “The Printer’s Ink Pad is at the end of its service life. Please contact Epson Support” or “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support”, your Waste Ink Counter is overflowed.
– I think you should download WIC RESET TOOL which is called Epson Stylus NX510 Resetter then read the index of the Waste Ink Counter by clicking the button “read waste counters”.
What is Epson Stylus NX510 Waste ink counter? What is Epson Stylus NX510 Waste ink pad?
Epson inkjet printers have inside a part of sponge for absorbing and collecting waste inks. It is called waste ink pad.
Ink is collected by waste ink pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs. While printhead cleaning process ink flush through printhead to waste ink pad.
So one time it can be overflowed because it could not absorb ink anymore then the ink will leak from the bottom of the Epson Stylus NX510 printer.
The printer counts how much ink flow to waste ink pad and stores this number into printer’s memory.
This number is called Protection Counter or Waste Ink Counter.
What is Epson Stylus NX510 Waste ink counter overflow?
To prevent ink leaking outside the Epson Stylus NX510 printer from Waste ink Pad, the waste ink counter may be overflowed and printer will stop.
Full waste ink counter is 100%. Overflow means that counters values are more than 100%. If one and also two counters are overflow – you can’t print – you should be RESET WASTE INK COUNTERS
The overflowing ink can make the printer dirty and be broken down so the waste ink tray prevents this problem by this flowing process, before the waste ink is full and can be overflowed, the waste ink counter overflow to guarantee the printer’s safety.
So when the waste ink counter is full, you can’t print anymore and you will receive the notification about the full waste ink counter.
There are a lot of waste ink counters in Epson Stylus NX510 printer therefore if one of them is more than 100%, the printer will stop printing and all you need is resetting the waste ink counter back to 0% as well as clean the waste ink tray.
How to avoid the waste ink pad overflowing.
After you reset the waste ink counter back to 0% many times and the printers will go on working and let the waste ink flow into tray so the waste ink tray will be full soon and then overflow. This problem affect directly to printer so you need an useful solution to avoid the waste ink pad overflowing.
The first way: After resetting the waste ink counter, you should disassemble the waste ink pad and use the device to take all the waste ink the clean the waste ink pad to contain the waste ink.
But when you use this way, you need to open the printer regularly so it is inconvenient so you should see the next method to avoid this problems.
The second way: you can use a bottle and a segment conductor is suitable with the Epson Stylus NX510 printer’s conductor then let the waste ink flow into the conductor that is connected with the bottle
When the waste ink bottle is full, you only have to the segment conductor and clean it to reuse.
Note: Let’s set the bottle under the printer to make the flowing process fluently. If you put the bottle higher than the bottom of the Epson Stylus NX510 printer, the waste ink will not flow out
Reset Epson Stylus NX510 printer Waste ink counter instruction
Step 1: Download Epson Stylus NX510 resetter and install
You are able to download by click on one of the links:
– Download Epson Stylus NX510 resetter for Windows (.zip): Download here
– Download WIC Reset Utility for Windows (.rar): Download here
– Download Epson Stylus NX510 resetter for Windows (Mirror): Download here
or go to download page here: Download Epson Stylus NX510 Resetter
How to install Epson Stylus NX510 resetter:
Step 1.1: Run Wicreset.exe file, click “Yes“, click “I accept the agreement“.
After that click “Next” to go to the next step
Step 1.2: Now, select distination location to install Epson Stylus NX510 resetter. If you would like to select a different folder, click Browse then select a folder. If you want to install WIC Reset Utility in default folder, click Next to continue
After that, click Next when “Select Start Menu Folder” window appears, if you don’t want to create a start menu folder click on “Don’t create a Start Menu folder“.
Step 1.3: Click to check “Create a desktop shortcut” then click Next to continue install Epson Stylus NX510 resetter
Step 1.4: Click Install to continue with the Epson Stylus NX510 Resetter installation
Please wait. Setup has finished installing Epson Stylus NX510 resetter on your computer when you see the Window: “Completing the WicReset Setup Wizard“
And this is WIC Reset Tool (Epson Stylus NX510 resetter)
Step 2: Buy the WIC Reset Key
You can buy the Epson Stylus NX510 Resetter Key with Paypal, VISA, Master Card or Webmoney. ONE RESET KEY = $8.99 (This is One Time Reset Key)
Step 2.1: Click here to go to Buy Page, and also visit: https://resetkey.net/buy
Step 2.2: Enter the number of keys you want to buy in to Quantity box.
Step 2.3: Click on ADD TO CART button, then click Checkout with Paypal to pay the reset key and get the reset key from your email (You will receive the reset key in less than 10 seconds).
if you pay the reset key with Webmoney, please send money to WMZ Wallet: Z230787931543 then contact us (manilacare@gmail.com) to get the reset key
Step 3: Instruction on how to reset your Epson Stylus NX510 printer’s Waste Ink Counters
Please watch this video to know step to steps to reset your Epson Stylus NX510 printer’s Waste ink counters by using Epson Stylus NX510 resetter (WIC Reset Tool.)
If you have any problem with Epson Stylus NX510 resetter, please don’t hesitate to contact us.