In this article, we will give you the guide of resetting the waste in counter on Epson R210 printer. You will have trouble on waste ink counter during Epson usage process and the signals that you can realize this issue easily are not working printer, the blinking red light problem and the error message on the LCD screen “The Printer’s Ink Pads are at the end of their service life”.
You have had an Epson R210 printer in a good condition but today after turning it on to print the document, the printer doesn’t work and it also has the flashing red light error as well as you receive an problem message on the LCD screen: “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support”, we call this problem is Waste Ink Counter Overflow.
You completely fix this problem with a low fee and you don’t need to bring your Epson printer to the store, it is very expensive and time – consuming.
What is the Waste Ink Counter on Epson R210 Printer? How can you fix?
As I have mentioned, you should sure your printer having the Waste Ink Counter error or not, in case your printer has this problem, let’s go on fixing it or you can call the fixing service to save your time.
How to realize the Waste Ink Counter Overflow in Epson R210 printer
Let’s check your Epson R210 printer carefully based on these steps below:
– When the printer suddenly stops working, you may think that your printer is having Waste Ink Counter Overflow but there are a lot of others such as paper jam.
– Make sure by checking the Epson R210 printer’s LCD screen in case you have or you can check the error message on the computer, if you see “The Printer’s Ink Pad is at the end of its service life. Please contact Epson Support” or “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support”, your Waste Ink Counter is overflowed.
– I think you should download WIC RESET TOOL which is called Epson R210 Resetter then read the index of the Waste Ink Counter by clicking the button “read waste counters”.
What is Epson R210 Waste ink counter? What is Epson R210 Waste ink pad?
Epson inkjet printers have inside a part of sponge for absorbing and collecting waste inks. It is called waste ink pad.
Ink is collected by waste ink pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs. While printhead cleaning process ink flush through printhead to waste ink pad.
So one time it can be overflowed because it could not absorb ink anymore then the ink will leak from the bottom of the Epson R210 printer.
The printer counts how much ink flow to waste ink pad and stores this number into printer’s memory.
This number is called Protection Counter and also Waste Ink Counter.
What is Epson R210 Waste ink counter overflow?
To prevent ink leaking outside the Epson R210 printer from Waste ink Pad, the waste ink counter may be overflowed and printer will stop.
Full waste ink counter is 100%. Overflow means that counters values are more than 100%. If one and also two counters are overflow – you can’t print – you need to RESET WASTE INK COUNTERS
After a long period of usage or you had used it for a large quantity of printing document, the printer will leave a lot of waste ink into Waste ink pad. If you don’t care about this problem, the waste ink tray will be full then the waste ink can be overflowed.
This affects other components and can make the Epson R210 printer be broken down. We can predict that case so Epson installed to make the Waste Ink Counter overflow soon to stop the printing procedure, this ensures that there is no waste ink which flows into the waste ink pad and prevent the waste ink from overflowing.
When one of the waste ink counters is overflowed, the printer will stop instantly. You have to clean the waste ink tray or replace then reset Waste ink counter back to 0% to continue printing.
How to prevent the waste ink pad overflowing.
After you reset the waste ink counter back to 0% many times and the printers will go on working and let the waste ink flow into tray so the waste ink tray will be full soon and then overflow. This problem affect directly to printer so you need an useful solution to prevent the waste ink pad overflowing.
The professional method: you can create an open bottle that contains the waste ink to help it can contain more waste ink. Let’s see the picture below:
But you should be have some tools and your creativity. If you can’t do this, you can use this following way.
This way is very simple, when you reset the waste ink counter, you can dissemble the top of the waste ink tray then take the waste ink out, if you can let’s dissemble the sponge and clean it.
You also buy a new waste ink tray to replace.
The disadvantage of this way is you can forget to clean waste ink pad so the ink can be overflowed. This can be bad effect to the components of the Epson R210.
How to reset Epson R210 printer Waste ink counter
Step 1: Download Epson R210 resetter and install
You are able to download by click on one of these links:
– Download Epson R210 resetter for Windows (.zip): Download here
– Download WIC Reset Utility for Windows (.rar): Download here
– Download WIC Reset Utility for Windows (Mirror): Download here
or go to download page here: Download Epson R210 Resetter
How to setting up WIC Reset Utility:
Step 1.1: Open Wicreset.exe file, click “Yes“, click “I accept the agreement“.
And now click “Next” to continue
Step 1.2: Now, select distination location to setup WIC Reset Utility. If you would like to select a different folder, click Browse then select a folder. If you want to install WIC Reset Utility in default location, click Next to continue
After that, click Next when “Select Start Menu Folder” window appears, if you don’t want to create a start menu folder click on “Don’t create a Start Menu folder“.
Step 1.3: Click to check “Create a desktop shortcut” then click Next to continue setup Epson R210 resetter
Step 1.4: Click Install to continue with the WIC Reset installation
Please wait. Installation has finished installing Epson R210 resetter on your computer when you see the Window: “Completing the WicReset Setup Wizard“
And this is WIC Reset Tool (Epson R210 resetter)
Step 2: Buy the WIC Reset Key
You can buy the WIC RESET KEY with Paypal, VISA, Master Card or Webmoney. ONE RESET KEY = $8.99 (This is One Time Reset Key)
Step 2.1: Click here to go to Buy Page, and also visit: https://resetkey.net/buy
Step 2.2: Enter the number of keys you want to buy in to Quantity box.
Step 2.3: Click on ADD TO CART button, then click Checkout with Paypal to pay the reset key and get the reset key from your email (You will receive the reset key in less than 10 seconds).
if you pay the reset key with Webmoney, please send money to WMZ Wallet: Z230787931543 then contact us (email@example.com) to get the reset key
Step 3: Instruction on how to reset your Epson R210 printer’s Waste Ink Counters
Please watch this video to know step to steps to reset your Epson R210 printer’s Waste ink counters by using Epson R210 resetter (WIC Reset Tool.)
If you have any problem with Epson R210 resetter, please don’t hesitate to contact us.