In this post, we will give you the instruction of resetting the waste in counter on Epson Stylus NX200 printer. You will have trouble on waste ink counter during Epson usage process and the signals that you can realize this issue easily are not working printer, the blinking red light problem and the problem message on the LCD screen “The Printer’s Ink Pads are at the end of their service life”.
The Waste Ink Counter Overflow is a common error in the Epson Stylus NX200 printer as well as almost of Epson printer.
Most of them has this problem and let’s watch out some following signals. When your printer stops working and appear the message on the screen “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support” and the red light is continuously blinking.
Now you can conclude that your printer is having the Waste Ink Counter Overflow however you can solve this problem according to our instruction.
Understand the Waste Ink Counter and how to fix this
As I have mentioned, you should sure your printer having the Waste Ink Counter error or not, in case your printer has this problem, let’s go on fixing it or you can call the fixing service to save your time.
How to know that the Waste Ink Counter printer is overflowed
Let’s check your Epson Stylus NX200 printer carefully based on these steps below:
– When the printer suddenly stops working, you may think that your printer is having Waste Ink Counter Overflow but there are a lot of others such as paper jam.
– Make sure by checking the Epson Stylus NX200 printer’s LCD screen in case you have or you can check the problem message on the computer, if you see “The Printer’s Ink Pad is at the end of its service life. Please contact Epson Support” or “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support”, your Waste Ink Counter is overflowed.
– I think you should download WIC RESET TOOL which is called Epson Stylus NX200 Resetter then read the index of the Waste Ink Counter by clicking the button “read waste counters”.
What is Epson Stylus NX200 Waste ink pad? What is Epson Stylus NX200 Waste ink counter?
Epson inkjet printers have inside a part of sponge for absorbing and collecting waste inks. It is called waste ink pad.
Ink is collected by waste ink pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs. While printhead cleaning process ink flush through printhead to waste ink pad.
So one time it can be overflowed because it could not absorb ink anymore then the ink will leak from the bottom of the Epson Stylus NX200 printer.
The printer counts how much ink flow to waste ink pad and stores this number into printer’s memory.
This number is called Protection Counter and also Waste Ink Counter.
What is Epson Stylus NX200 Waste ink counter overflow?
To prevent ink leaking outside the Epson Stylus NX200 printer from Waste ink Pad, the waste ink counter may be overflowed and printer will stop.
Full waste ink counter is 100%. Overflow means that counters values are more than 100%. If one or two counters are overflow – you can’t print – you should be RESET WASTE INK COUNTERS
After a long period of usage and also you had used it for a large quantity of printing document, the printer will leave a lot of waste ink into Waste ink pad. If you don’t care about this problem, the waste ink tray will be full then the waste ink can be overflowed.
This affects other components and can make the Epson Stylus NX200 printer be broken down. We can predict that case so Epson installed to make the Waste Ink Counter overflow soon to stop the printing procedure, this ensures that there is no waste ink which flows into the waste ink pad and avoid the waste ink from overflowing.
When one of the waste ink counters is overflowed, the printer will stop instantly. You have to clean the waste ink tray or replace then reset Waste ink counter back to 0% to continue printing.
How to avoid the waste ink pad overflowing.
If you use the Epson Stylus NX200 printer regularly, this problem will usually happen in your Epson printer so you should use some skills in resetting process to avoid overflowing waste ink.
The first way: After resetting the waste ink counter, you should disassemble the waste ink pad and use the device to take all the waste ink the clean the waste ink pad to contain the waste ink.
But when you use this way, you should be open the printer regularly so it is inconvenient so you should see the next method to solve this problems.
The second way: you can use a bottle and a segment conductor is suitable with the Epson Stylus NX200 printer’s conductor then let the waste ink flow into the conductor that is connected with the bottle
When the bottle is almost full, you only need to the segment conductor and clean it to reuse.
Note: Let’s set the bottle under the printer to make the flowing process fluently. If you put the bottle higher than the bottom of the Epson Stylus NX200 printer, the waste ink will not flow out
How to reset Epson Stylus NX200 printer Waste ink counter
Step 1: Download Epson Stylus NX200 resetter and setup
You are able to download by select one of these links:
– Download Epson Stylus NX200 resetter for Windows (.zip): Download here
– Download WIC Reset Utility for Windows (.rar): Download here
– Download Epson Stylus NX200 resetter for Windows (Mirror): Download here
or go to download page here: Download Epson Stylus NX200 Resetter
How to setting up Epson Stylus NX200 resetter:
Step 1.1: Run Wicreset.exe file, click “Yes“, click “I accept the agreement“.
Then click “Next” to go to the next step
Step 1.2: Now, select distination location to setup Epson Stylus NX200 resetter. If you would like to select a different folder, click Browse then select a folder. If you want to install Epson Stylus NX200 resetter in default location, click Next to continue
Then, click Next when “Select Start Menu Folder” window appears, if you don’t want to create a start menu folder click on “Don’t create a Start Menu folder“.
Step 1.3: Click to check “Create a desktop shortcut” then click Next to continue setup Epson Stylus NX200 resetter
Step 1.4: Click Install to continue with the Epson Stylus NX200 Resetter installation
Please wait. Setup has completed installing Epson Stylus NX200 resetter on your computer when you see the Window: “Completing the WicReset Setup Wizard“
And this is WIC Reset Tool (Epson Stylus NX200 resetter)
Step 2: Buy the WIC Reset Key
You can buy the WIC RESET KEY with Paypal, VISA, Master Card or Webmoney. ONE RESET KEY = $8.99 (One time reset only)
Step 2.1: Click here to go to Buy Page, or visit: https://resetkey.net/buy
Step 2.2: Enter the number of keys you want to buy in to Quantity box.
Step 2.3: Click on ADD TO CART button, then click Checkout with Paypal to pay the reset key and get the reset key from your email (You will receive the reset key in less than 10 seconds).
if you pay the reset key with Webmoney, please send money to WMZ Wallet: Z230787931543 then contact us (manilacare@gmail.com) to get the reset key
Step 3: Step to steps to reset your Epson Stylus NX200 printer’s Waste Ink Counters
Please watch this video to know how to reset your Epson Stylus NX200 printer’s Waste ink counters by using Epson Stylus NX200 resetter (WIC Reset Tool.)
If you have any problem with Epson Stylus NX200 resetter, please don’t hesitate to contact us.