We guide you how to download the Epson Stylus NX420W Resetter to solve the most common problem of the Epson printer. As we know that the waste ink counter make the printer stop printing as well as the red light blinks continuously and send a message with content “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support”.
In case the Epson Stylus NX420W printer has the waste ink counter overflow, you can fix it by yourself by resetting the waste ink counter of Epson Stylus NX420W printer back to 0% then your printer can work again smoothly. This is a popular problem and this error also happens regularly on Epson printer.
If you don’t know how to solve and you bring it to the guarantee store, you will need to pay a higher fee and waste lots of time. So you should follow this post to learn more and then you can fix it on your own.
Find the reason and the methods to fix the Waste Ink Counter on Epson Stylus NX420W printer.
Before you look for the reason of the Waste Ink counter on Epson Stylus NX420W printer, you should be sure that your Epson printer has this problem and also other same errors. You completely realize this problem based on these signals below.
How to know that the Waste Ink Counter printer is overflowed
Let’s check your Epson Stylus NX420W printer carefully based on these steps below:
– When the printer suddenly stops working, you may think that your printer is having Waste Ink Counter Overflow but there are a lot of others such as paper jam.
– Make sure by checking the Epson Stylus NX420W printer’s LCD screen in case you have or you can check the error message on the computer, if you see “The Printer’s Ink Pad is at the end of its service life. Please contact Epson Support” and also “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support”, your Waste Ink Counter is overflowed.
– I think you should download WIC RESET TOOL which is called Epson Stylus NX420W Resetter then read the index of the Waste Ink Counter by clicking the button “read waste counters”.
What is Epson Stylus NX420W Waste ink pad? What is Epson Stylus NX420W Waste ink counter?
Epson inkjet printers have inside a part of sponge for absorbing and collecting waste inks. It is called waste ink pad.
Ink is collected by waste ink pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs. While printhead cleaning process ink flush through printhead to waste ink pad.
So one time it can be overflowed because it could not absorb ink anymore then the ink will leak from the bottom of the Epson Stylus NX420W printer.
The printer counts how much ink flow to waste ink pad and stores this number into printer’s memory.
This number is called Protection Counter or Waste Ink Counter.
What is Epson Stylus NX420W Waste ink counter overflow?
To avoid ink leaking outside the Epson Stylus NX420W printer from Waste ink Pad, the waste ink counter may be overflowed and printer will stop.
Full waste ink counter is 100%. Overflow means that counters values are more than 100%. If one or two counters are overflow – you can’t print – you need to RESET WASTE INK COUNTERS
The overflowing ink can make the printer dirty and be broken down so the waste ink tray prevents this problem by this flowing process, before the waste ink is full and can be overflowed, the waste ink counter overflow to guarantee the printer’s safety.
So when the waste ink counter is full, you can’t print anymore and you will receive the notification about the full waste ink counter.
There are a lot of waste ink counters in Epson Stylus NX420W printer therefore if one of them is more than 100%, the printer will stop printing and all you need is resetting the waste ink counter back to 0% as well as clean the waste ink tray.
How to prevent the waste ink pad overflowing.
After you reset the waste ink counter back to 0% many times and the printers will go on working and let the waste ink flow into tray so the waste ink tray will be full soon and then overflow. This problem affect directly to printer so you need an useful solution to prevent the waste ink pad overflowing.
The first way: After resetting the waste ink counter, you should disassemble the waste ink pad and use the device to take all the waste ink the clean the waste ink pad to contain the waste ink.
But when you use this way, you have to open the printer regularly so it is inconvenient so you should see the next method to prevent this problems.
The second way: you can use a bottle and a segment conductor is suitable with the Epson Stylus NX420W printer’s conductor then let the waste ink flow into the conductor that is connected with the bottle
When the bottle is full, you only need to the segment conductor and clean it to reuse.
Note: Let’s set the bottle under the printer to make the flowing process fluently. If you put the bottle higher than the bottom of the Epson Stylus NX420W printer, the waste ink will not flow out
How to reset Epson Stylus NX420W printer Waste ink counter
Step 1: Download Epson Stylus NX420W resetter and install
You can download by click on one of these links:
– Download Epson Stylus NX420W resetter for Windows (.zip): Download here
– Download Epson Stylus NX420W resetter for Windows (.rar): Download here
– Download Epson Stylus NX420W resetter for Windows (Mirror): Download here
or go to download page here: Download Epson Stylus NX420W Resetter
How to setup Epson Stylus NX420W resetter:
Step 1.1: Open Wicreset.exe file, click “Yes“, click “I accept the agreement“.
Then click “Next” to go to the next step
Step 1.2: Now, select distination location to setup Epson Stylus NX420W resetter. If you would like to select a different folder, click Browse then select a folder. If you want to install Epson Stylus NX420W resetter in default folder, click Next to continue
Then, click Next when “Select Start Menu Folder” window appears, if you don’t want to create a start menu folder click on “Don’t create a Start Menu folder“.
Step 1.3: Click to check “Create a desktop shortcut” then click Next to continue install Epson Stylus NX420W resetter
Step 1.4: Click Install to continue with the WIC Reset installation
Please wait. Installation has completed installing Epson Stylus NX420W resetter on your computer when you see the Window: “Completing the WicReset Setup Wizard“
And this is WIC Reset Tool (Epson Stylus NX420W resetter)
Step 2: Buy the WIC Reset Key
You can buy the Epson Stylus NX420W Resetter Key with Paypal, VISA, Master Card and also Webmoney. ONE RESET KEY = $8.99 (This is One Time Reset Key)
Step 2.1: Click here to go to Buy Page, and also visit: https://resetkey.net/buy
Step 2.2: Enter the number of keys you want to buy in to Quantity box.
Step 2.3: Click on ADD TO CART button, then click Checkout with Paypal to pay the reset key and get the reset key from your email (You will receive the reset key in less than 10 seconds).
if you pay the reset key with Webmoney, please send money to WMZ Wallet: Z230787931543 then contact us (manilacare@gmail.com) to get the reset key
Step 3: Instructions to reset your Epson Stylus NX420W printer’s Waste Ink Counters
Please watch this video to know how to reset your Epson Stylus NX420W printer’s Waste ink counters by using Epson Stylus NX420W resetter (WIC Reset Tool.)
If you have any problem with Epson Stylus NX420W resetter, please don’t hesitate to contact us.