We guide you how to download the WIC Reset Tool or Epson Stylus NX435 resetter to solve the most common error of the Epson printer. As we know that the waste ink counter make the Epson Stylus NX435 printer stop printing as well as the red light blinks continuously and appear a message with content “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support”.
The Waste Ink Counter Overflow is a common problem in the Epson Stylus NX435 printer as well as almost of Epson printer.
Most of them has this problem and let’s watch out some following signals. When your printer stops working and appear the message on the screen “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support” and the red light is continuously blinking.
Now you can conclude that your Epson Stylus NX435 printer is having the Waste Ink Counter Overflow however you can fix this error according to our instruction.
Understand the Waste Ink Counter and how to solve this
As I have mentioned, you should sure your printer having the Waste Ink Counter problem or not, in case your printer has this problem, let’s go on fixing it or you can call the fixing service to save your time.
The signals of Epson Stylus NX435 printer when it has Waste Ink Counter Overflow error
Let’s check your Epson Stylus NX435 printer carefully based on these steps below:
– When the printer suddenly stops working, you may think that your printer is having Waste Ink Counter Overflow but there are a lot of others such as paper jam.
– Make sure by checking the Epson Stylus NX435 printer’s LCD screen in case you have or you can check the problem message on the computer, if you see “The Printer’s Ink Pad is at the end of its service life. Please contact Epson Support” or “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support”, your Waste Ink Counter is overflowed.
– I think you should download WIC RESET TOOL which is called Epson Stylus NX435 Resetter then read the index of the Waste Ink Counter by clicking the button “read waste counters”.
What is Epson Stylus NX435 Waste ink pad? What is Epson Stylus NX435 Waste ink counter?
Epson inkjet printers have inside a part of sponge for absorbing and collecting waste inks. It is called waste ink pad.
Ink is collected by waste ink pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs. While printhead cleaning process ink flush through printhead to waste ink pad.
So one time it can be overflowed because it could not absorb ink anymore then the ink will leak from the bottom of the Epson Stylus NX435 printer.
The printer counts how much ink flow to waste ink pad and stores this number into printer’s memory.
This number is called Protection Counter or Waste Ink Counter.
What is Epson Stylus NX435 Waste ink counter overflow?
To prevent ink leaking outside the Epson Stylus NX435 printer from Waste ink Pad, the waste ink counter may be overflowed and printer will stop.
Full waste ink counter is 100%. Overflow means that counters values are more than 100%. If one and also two counters are overflow – you can’t print – you have to RESET WASTE INK COUNTERS
The overflowing ink can make the printer dirty and be broken down so the waste ink tray prevents this problem by this flowing process, before the waste ink is full and can be overflowed, the waste ink counter overflow to guarantee the printer’s safety.
So when the waste ink counter is full, you can’t print anymore and you will receive the notification about the full waste ink counter.
There are a lot of waste ink counters in Epson Stylus NX435 printer therefore if one of them is more than 100%, the printer will stop printing and all you need is resetting the waste ink counter back to 0% as well as clean the waste ink tray.
How to prevent the waste ink pad overflowing.
After you reset the waste ink counter back to 0% many times and the printers will go on working and let the waste ink flow into tray so the waste ink tray will be full soon and then overflow. This problem affect directly to printer so you need an useful solution to prevent the waste ink pad overflowing.
The professional method: you can create an open bottle that contains the waste ink to help it can contain more waste ink. Let’s see the picture below:
But you need to have some tools and your creativity. If you can’t do this, you can use this following way.
This way is very simple, when you reset the waste ink counter, you can dissemble the top of the waste ink tray then take the waste ink out, if you can let’s dissemble the sponge and clean it.
You also buy a new waste ink tray to replace.
The disadvantage of this way is you can forget to clean waste ink pad so the ink can be overflowed. This can be bad effect to the components of the Epson Stylus NX435.
Reset Epson Stylus NX435 printer Waste ink counter instruction
Step 1: Download Epson Stylus NX435 resetter and install
You can download by select one of these links:
– Download Epson Stylus NX435 resetter for Windows (.zip): Download here
– Download WIC Reset Utility for Windows (.rar): Download here
– Download Epson Stylus NX435 resetter for Windows (Mirror): Download here
or go to download page here: Download Epson Stylus NX435 Resetter
How to install Epson Stylus NX435 resetter:
Step 1.1: Open Wicreset.exe file, click “Yes“, click “I accept the agreement“.
After that click “Next” to continue
Step 1.2: Now, select distination location to install WIC Reset Utility. If you would like to select a different folder, click Browse then select a folder. If you want to install WIC Reset Utility in default location, click Next to continue
Then, click Next when “Select Start Menu Folder” window appears, if you don’t want to create a start menu folder click on “Don’t create a Start Menu folder“.
Step 1.3: Click to check “Create a desktop shortcut” then click Next to continue install Epson Stylus NX435 resetter
Step 1.4: Click Install to continue with the WIC Reset installation
Please wait. Setup has completed installing Epson Stylus NX435 resetter on your computer when you see the Window: “Completing the WicReset Setup Wizard“
And this is WIC Reset Tool (Epson Stylus NX435 resetter)
Step 2: Buy the WIC Reset Key
You can buy the Epson Stylus NX435 Resetter Key with Paypal, VISA, Master Card or Webmoney. ONE RESET KEY = $8.99 (This is One Time Reset Key)
Step 2.1: Click here to go to Buy Page, and also visit: https://resetkey.net/buy
Step 2.2: Enter the number of keys you want to buy in to Quantity box.
Step 2.3: Click on ADD TO CART button, then click Checkout with Paypal to pay the reset key and get the reset key from your email (You will receive the reset key in less than 10 seconds).
if you pay the reset key with Webmoney, please send money to WMZ Wallet: Z230787931543 then contact us (firstname.lastname@example.org) to get the reset key
Step 3: How to reset your Epson Stylus NX435 printer’s Waste Ink Counters
Please watch this video to know how to reset your Epson Stylus NX435 printer’s Waste ink counters by using Epson Stylus NX435 resetter (WIC Reset Tool.)
If you have any problem with Epson Stylus NX435 resetter, please don’t hesitate to contact us.