We instruction you how to download the Epson T20 Resetter to solve the most common error of the Epson printer. As we know that the waste ink counter make the printer stop printing as well as the red light blinks continuously and send a message with content “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support”.
The Waste Ink Counter Overflow is a common error in the Epson T20 printer as well as almost of Epson printer.
Most of them has this error and let’s watch out some following signals. When your printer stops working and appear the message on the screen “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support” and the red light is continuously blinking.
Now you can conclude that your printer is having the Waste Ink Counter Overflow however you can solve this error according to our instruction.
Find the reason and the methods to solve the Waste Ink Counter on Epson T20 printer.
Before you look for the reason of the Waste Ink counter on Epson T20 printer, you should be sure that your Epson printer has this problem or other same errors. You completely realize this problem based on these signals below.
How to know that the Waste Ink Counter printer is overflowed
These are 3 steps to sure that your Epson T20 printer is overflowed or not:
– When Waste ink counter is overflowed, two red lights of the printer will blink continuously.
– Check the notifications of the computer if you see “The Printer’s Ink Pad is at the end of its service life. Please contact Epson Support” and also “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support” that means your waste ink counter is overflowed, you need to reset it back to 0% to continue using.
– Let’s download Epson T20 Resetter and also WIC RESET TOOL then connect with the computer by USB cable, connect computer to the internet, then choose the Epson T20 printer on the Wicreset’s left sidebar then click “Read Waste Counters” to check the number of Waste Ink Counter. In case one of them is more than 100% that means your Waste Ink Counter is overflowed.
What is Epson T20 Waste ink counter? What is Epson T20 Waste ink pad?
Epson inkjet printers have inside a part of sponge for absorbing and collecting waste inks. It is called waste ink pad.
Ink is collected by waste ink pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs. While printhead cleaning process ink flush through printhead to waste ink pad.
So one time it can be overflowed because it could not absorb ink anymore then the ink will leak from the bottom of the Epson T20 printer.
The printer counts how much ink flow to waste ink pad and stores this number into printer’s memory.
This number is called Protection Counter or Waste Ink Counter.
What is Epson T20 Waste ink counter overflow?
To avoid ink leaking outside the Epson T20 printer from Waste ink Pad, the waste ink counter may be overflowed and printer will stop.
Full waste ink counter is 100%. Overflow means that counters values are more than 100%. If one and also two counters are overflow – you can’t print – you have to RESET WASTE INK COUNTERS
The overflowing ink can make the printer dirty and be broken down so the waste ink tray prevents this problem by this flowing process, before the waste ink is full and can be overflowed, the waste ink counter overflow to guarantee the printer’s safety.
So when the waste ink counter is full, you can’t print anymore and you will receive the notification about the full waste ink counter.
There are a lot of waste ink counters in Epson T20 printer therefore if one of them is more than 100%, the printer will stop printing and all you need is resetting the waste ink counter back to 0% as well as clean the waste ink tray.
How to avoid the waste ink pad overflowing.
If you use the Epson T20 printer regularly, this problem will usually happen in your Epson printer so you should use some skills in resetting process to avoid overflowing waste ink.
The first way: After resetting the waste ink counter, you should disassemble the waste ink pad and use the device to take all the waste ink the clean the waste ink pad to contain the waste ink.
But when you use this way, you have to open the printer regularly so it is inconvenient so you should see the next method to avoid this problems.
The second way: you can use a bottle and a segment conductor is suitable with the Epson T20 printer’s conductor then let the waste ink flow into the conductor that is connected with the bottle
When the bottle is almost full, you only have to the segment conductor and clean it to reuse.
Note: Let’s set the bottle under the printer to make the flowing process fluently. If you put the bottle higher than the bottom of the Epson T20 printer, the waste ink will not flow out
How to reset Epson T20 printer Waste ink counter
Step 1: Download Epson T20 resetter and install
You are able to download by select one of the links:
– Download Epson T20 resetter for Windows (.zip): Download here
– Download Epson T20 resetter for Windows (.rar): Download here
– Download WIC Reset Utility for Windows (Mirror): Download here
or go to download page here: Download Epson T20 Resetter
How to setup Epson T20 resetter:
Step 1.1: Open Wicreset.exe file, click “Yes“, click “I accept the agreement“.
Then click “Next” to go to the next step
Step 1.2: Now, select distination location to install WIC Reset Utility. If you would like to select a different folder, click Browse then select a folder. If you want to install Epson T20 resetter in default folder, click Next to continue
Then, click Next when “Select Start Menu Folder” window appears, if you don’t want to create a start menu folder click on “Don’t create a Start Menu folder“.
Step 1.3: Click to check “Create a desktop shortcut” then click Next to continue install Epson T20 resetter
Step 1.4: Click Install to continue with the Epson T20 Resetter installation
Please wait. Installation has completed installing Epson T20 resetter on your computer when you see the Window: “Completing the WicReset Setup Wizard“
And this is WIC Reset Tool (Epson T20 resetter)
Step 2: Buy the WIC Reset Key
You can buy the WIC RESET KEY with Paypal, VISA, Master Card or Webmoney. ONE RESET KEY = $8.99 (One time reset only)
Step 2.1: Click here to go to Buy Page, or visit: https://resetkey.net/buy
Step 2.2: Enter the number of keys you want to buy in to Quantity box.
Step 2.3: Click on ADD TO CART button, then click Checkout with Paypal to pay the reset key and get the reset key from your email (You will receive the reset key in less than 10 seconds).
if you pay the reset key with Webmoney, please send money to WMZ Wallet: Z230787931543 then contact us (manilacare@gmail.com) to get the reset key
Step 3: Instructions to reset your Epson T20 printer’s Waste Ink Counters
Please watch this video to know step to steps to reset your Epson T20 printer’s Waste ink counters by using Epson T20 resetter (WIC Reset Tool.)
If you have any problem with Epson T20 resetter, please don’t hesitate to contact us.