Here is the simple way to reset the waste ink counter on Epson T33 printer by yourself, you don’t have to take it to a service center and it also repairs the printer’s problem like not working and the blinking red light problem “The printer’s ink pads are at the end of their service life. Please contact Epson support”.
The Waste Ink Counter Overflow is a common problem in the Epson T33 printer as well as almost of Epson printer.
Most of them has this error and let’s watch out some following signals. When your printer stops working and appear the message on the screen “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support” and the red light is continuously blinking.
Now you can conclude that your Epson T33 printer is having the Waste Ink Counter Overflow however you can fix this error according to our instruction.
Find the reason and the methods to repair the Waste Ink Counter on Epson T33 printer.
As I have mentioned, you should sure your printer having the Waste Ink Counter problem or not, in case your printer has this problem, let’s go on fixing it and also you can call the fixing service to save your time.
How to realize the Waste Ink Counter Overflow in Epson T33 printer
There are three popular ways to know that your Epson T33 printer has Waste Ink Counter overflowed:
– First of all, when your Epson T33 printer is working and suddenly stops working as well as the red light is blinking continuously.
– Secondly, there is an problem message: “The Printer’s Ink Pads are at the end of Their service life. Please contact Epson Support” and also “The Printer’s Ink Pad is at the end of its service life. Please contact Epson Support”.
– Thirdly, when you use the Epson T33 Resetter and also WIC Reset Tool to read the numbers the Waste Ink counters and you can see the number is bigger that 100%
What is Epson T33 Waste ink pad? What is Epson T33 Waste ink counter?
Epson inkjet printers have inside a part of sponge for absorbing and collecting waste inks. It is called waste ink pad.
Ink is collected by waste ink pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs. While printhead cleaning process ink flush through printhead to waste ink pad.
So one time it can be overflowed because it could not absorb ink anymore then the ink will leak from the bottom of the Epson T33 printer.
The printer counts how much ink flow to waste ink pad and stores this number into printer’s memory.
This number is called Protection Counter or Waste Ink Counter.
What is Epson T33 Waste ink counter overflow?
To avoid ink leaking outside the Epson T33 printer from Waste ink Pad, the waste ink counter may be overflowed and printer will stop.
Full waste ink counter is 100%. Overflow means that counters values are more than 100%. If one and also two counters are overflow – you can’t print – you have to RESET WASTE INK COUNTERS
After a long period of usage and also you had used it for a large quantity of printing document, the printer will leave a lot of waste ink into Waste ink pad. If you don’t care about this problem, the waste ink tray will be full then the waste ink can be overflowed.
This affects other components and can make the Epson T33 printer be broken down. We can predict that case so Epson installed to make the Waste Ink Counter overflow soon to stop the printing procedure, this ensures that there is no waste ink which flows into the waste ink pad and prevent the waste ink from overflowing.
When one of the waste ink counters is overflowed, the printer will stop instantly. You should be clean the waste ink tray and also replace then reset Waste ink counter back to 0% to continue printing.
How to avoid the waste ink pad overflowing.
After you reset the waste ink counter back to 0% many times and the printers will go on working and let the waste ink flow into tray so the waste ink tray will be full soon and then overflow. This problem affect directly to printer so you need an useful solution to avoid the waste ink pad overflowing.
The first way: After resetting the waste ink counter, you should disassemble the waste ink pad and use the device to take all the waste ink the clean the waste ink pad to contain the waste ink.
But when you use this way, you have to open the printer regularly so it is inconvenient so you should see the next method to solve this problems.
The second way: you can use a bottle and a segment conductor is suitable with the Epson T33 printer’s conductor then let the waste ink flow into the conductor that is connected with the bottle
When the bottle is almost full, you only have to the segment conductor and clean it to reuse.
Note: Let’s set the bottle under the printer to make the flowing process fluently. If you put the bottle higher than the bottom of the Epson T33 printer, the waste ink will not flow out
Reset Epson T33 printer Waste ink counter instruction
Step 1: Download Epson T33 resetter and setup
You are able to download by click on one of these links:
– Download Epson T33 resetter for Windows (.zip): Download here
– Download Epson T33 resetter for Windows (.rar): Download here
– Download Epson T33 resetter for Windows (Mirror): Download here
or go to download page here: Download Epson T33 Resetter
How to setting up Epson T33 resetter:
Step 1.1: Run Wicreset.exe file, click “Yes“, click “I accept the agreement“.
And now click “Next” to go to the next step
Step 1.2: Now, select distination location to install Epson T33 resetter. If you would like to select a different folder, click Browse then select a folder. If you want to install Epson T33 resetter in default folder, click Next to continue
Then, click Next when “Select Start Menu Folder” window appears, if you don’t want to create a start menu folder click on “Don’t create a Start Menu folder“.
Step 1.3: Click to check “Create a desktop shortcut” then click Next to continue setup Epson T33 resetter
Step 1.4: Click Install to continue with the Epson T33 Resetter installation
Please wait. Setup has finished installing Epson T33 resetter on your computer when you see the Window: “Completing the WicReset Setup Wizard“
And this is WIC Reset Tool (Epson T33 resetter)
Step 2: Buy the WIC Reset Key
You can buy the WIC RESET KEY with Paypal, VISA, Master Card or Webmoney. ONE RESET KEY = $8.99 (One time reset only)
Step 2.1: Click here to go to Buy Page, and also visit: https://resetkey.net/buy
Step 2.2: Enter the number of keys you want to buy in to Quantity box.
Step 2.3: Click on ADD TO CART button, then click Checkout with Paypal to pay the reset key and get the reset key from your email (You will receive the reset key in less than 10 seconds).
if you pay the reset key with Webmoney, please send money to WMZ Wallet: Z230787931543 then contact us (manilacare@gmail.com) to get the reset key
Step 3: Instructions to reset your Epson T33 printer’s Waste Ink Counters
Please watch this video to know how to reset your Epson T33 printer’s Waste ink counters by using Epson T33 resetter (WIC Reset Tool.)
If you have any problem with Epson T33 resetter, please don’t hesitate to contact us.