Canon printer blinking 7 times and show Supported code: 5B00 error, how to fix this problem?
This post will teach you three different ways of solving the 5B00 error message on regular and multifunction canon printers.
What does canon error code 5B00 mean? This means overflowing of the waste ink counter and you need to reset Canon Waste Ink Counter ( clear waste counter). The are 3 blinks of printer such as: orange light- 7 times. Alternatively Green (power) and Orange.
And the operating system show the error “Supportcode:5B00” below:
This mean Canon printer Waste ink counter’s overflowing and what you need is resetting.
What is Canon 5B00 error, how to fix this problem?
About Canon 5B00 error
Your own Canon printer’s ink cartridges have more and more ink spills, because ink cartridge is proper and ink system also installs continuously, this is regular 5B00 problem message appearing on your own Canon printer.
As you know that Canon printer is one of the best printer on the market, it adopts the continuous Ink System on several models. They have some basic problems and today we are going to talk about this and show you how to eliminate them to save money and time.
Not only cost saving but it is also efficient for you when installing a continuous Ink System. Sometimes, this system has some disadvantages like this : regularly, the cartridge is made to printer 200 pages, the Continuous Ink System ‘ll make the printer overdo this number.
In addition, the CISS can sometimes cause an ink spill in the printer, the printing pads will be filled up and create the 5B00 Error code. Now we will give you the ways to solve this error and go on using the printer.
Possible solutions to this problems:
You need to be patient and read a lot these solutions.
You can contact us by leaving a comment or we will be glad to guide you as soon as possible if you need help following the step below.
Method to solve the 5B00 error message on Canon printer.
First procedure to fix Canon 5B00 error:
Firstly, we will show you how to set the original factory settings for your printer. So you will be working on the whole printer not on direct ink pad problems. This reinstating procedure will do on all the issues which could be found in your particular canon printer model, containing the full ink pad situation.
You should turn your printer off and keep it during the procedure, we usually work with the stop/ reset button.
The regular and non-multifunction printers mainly use this first procedure. But the button relate to this post can be found on either printer types or with or without Inkjet system. When you have done this completely, then your printer’s name will have the words “copy1” connect to it on your computer. In case you want to know how to install a default printer, please read this post.
Step 1:
Firstly, you turn your canon printer off.
Steps 2:
Press and keep the stop/reset button down.
Step 3:
Press your stop/reset button on while you’re keeping the stop/reset down. This will turn the printer on and off again.
Step 4:
Turn the stop/reset button off and press it again 2 times in a row, with light, tapping motions. Don’t forget to keep the on/off button pressed while doing this.
Step 5:
Let turn all the keys you were pressing down and wait until rest be on your screen.
Step 6:
Press the stop/reset button again for 5 times and then touch the on/off button two times fast.
Second method to fix Canon 5B00 error:
This particular tutorial works perfectly on multifunction printers. The printer run in service mode we can work on this matter itself, make the printer think the ink absorber pad is empty not full. You can open and tidy the ink deposit, please do that because of ink in it.
You can get it clean by laying a napkin on it and leaving it for a while, and it attract as much ink as possible and clear the deposit a bit.
Step 1:
First, turn your canon multifunction printer on. We will work with yhe printer on throughout this entire process because of direct working on the printer’s settings.
Step 2:
Secondly, press the menu button on the printer.
Step 3:
Now put your canon printer in service mode. So as to do this, you must press the SCAN, COPY and SCAN buttons in that exact order. Please take into account the entire service mode menu in English, as a computer’s BIOS.
Step 4:
Press the + key until you’ve touched the COUNTE ACESS option. Press the OK button once.
Step 5:
You printer’s screen appear a page counter. The number on it point out the number of pages printed in total. Do you think it’s too much?
Step 6:
Press the OK button.
Step 7:
Press the COPY button.
Step 8:
Use the – key to lower this score all the way back to zero and press OK.
Step 9:
Go on using the +symbol to look at the menu and stop once you get to SCAN PAGE COUNT. Set this counter back to zero so as to wipe the score on the page counter on our canon printer, looked for only when it’s in service mode.
Step 10:
Cruise the entire menu slowly until you touch the ABS-M DON’T COUNT option. Set this score back to zero and click OK.
Step 11:
Press the stop/reset button after everything else has been down.
Step 12:
Turn your printer off and come back again by using the on/off button on it.
If the VALID KEY message appears on your computer screen at the end of this process, cut the powder cable off from the printer and connect it once more.
Third method to fix Canon 5B00 error:
This is final process will solve this matter for you, however it will work directly on your printer’s systems that is now noticing that the ink absorber pad is full. So as to do that, you have to install a restoring program which help you deal with the printer’s internal processes; this program will do all the vital configurations on your computer. If you connect this printer to other computers, the 5B00 error code may appear again.
You will also have to have an extracting software which let you t reach the files in the zipped folders. Please click here to download Winrar.
Step 1:
Firstly, please install the 5B00 error restoring program for Canon printer from following link. Save it somewhere you can open easily and extract the files in it. Now you can put your Canon printer in service mode by the next steps below.
Step 2:
Turn the printer off, it is not necessary to disconnect the powder cable from Canon printer.
Step 3:
Press and hold the stop/ reset button and hit the on/off one.
Step 4:
Keep the on/off button down and let turn the stop/reset one off.
Step 5:
Press the stop/reset button on printer five times in a row during holding the on/off button pressed down. Release both keys on this has been down.
Step 6:
Now, your printer is in fully operational service mode.
Step 7:
Store the file you download and take it out from zipped folders.
Step 8:
When you’re done this once, let open the extract folder and click on the SERVICETOLL.EXE file twice.
Step 9:
Now, click on reload button and connect the words ” copy 1″ to the every end of the old name. Please read this post carefully if you want to learn to set a default printer up on your computer.
Step 10:
Put the blank sheets inside the paper tray and press the main button on your printer. You need to wait until the ERROR 001 message shows on screen and click on it.
Step 11:
Finally, turn your printer off. You may have to press it twice so as to get this done. This way is over and all things ought to be solved right now.
We’ll take no responsibilities for any damage you get by following the guide in our blog. But if you need any helps with this cases, please contact us by a comment in the section below this post.
Fourth Method to fix Canon 5B00 error: Fix Canon 5B00 error by reset Waste ink counter by using Wic Reset Utility.
Download WIC Reset Tool- Download Canon Reset.
Download the LATEST version of the WIC reset utility here: Download WIC Reset Tool
You have to put printer in service mode in order to reset Canon 5B00 Waste Ink Counter Error.
And then use WIC Reset Utility Tool with the reset key to reset you Canon printer. It takes about one minute!
Reading some notes before resetting Canon 5B00:
If you use Canon Service Tool such as ST V3400, V4200 etc…, your printer can never get in Service Mode from then on.
Therefore there is only way to solve this problem is to replace and reset EEPROM CHIP program on main board printers.
If you don’t pay for resetting key, this means you can’t put printer in Service Mode, so it won’t work.
How to put Canon printer in service mode:
Step 1: Turn your Canon printer off.
Step 2: Press and keep printer’s power button.
Step 3: Press and hold printer’s power one.
Step 4: Release Canon printer’s RESET button and still press POWER one.
Step 5: Press and release Canon printer’s RESET button five times.
Step 6: Release printer’s POWER button:
Now put Canon Printer on SERVICE MODE condition. In this condition, computer detects new hardware.
Step 7: When OS detects NEW HARDWARE, wait for 20 seconds and press CANCEL
How to reset Canon Printer 5B00 Waste materials Ink Counter error exactly.
After you put your Canon printer in SERVIC MODE, please follow this instruction below:
Step 1: Download latest WIC Reset Utility with above link.
Step 2: Please buy Canon Waste Ink Counter Reset Key here: Buy WIC Reset KEY – Only $8.99
Step 3: Run WIC Reset, click on “Clear Waste Counters” button, read the checked list, if all of them are good, click YES to continue reset Canon Waste Counter:
Step 4: Enter the Canon Reset Key
If everything is fine, you will receive a CONGRATULATION message.
Now check Canon printer status in Control Panel, if it shows that “PRINTER IS ONLINE”, your CANON printer is ready to print with no errors and no waste Counters Overflow.
Thank you for reading this post. Please share or like if this post help you. Kind regards
