We guide you how to download the WIC Reset Tool and also Epson Stylus NX215 resetter to solve the most common error of the Epson printer. As we know that the waste ink counter make the printer stop printing as well as the red light blinks continuously and show a message with content “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support”.
The Waste Ink Counter Overflow is a common error in the Epson Stylus NX215 printer as well as almost of Epson printer.
Most of them has this error and let’s watch out some following signals. When your printer stops working and appear the message on the screen “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support” and the red light is continuously blinking.
Now you can conclude that your Epson Stylus NX215 printer is having the Waste Ink Counter Overflow however you can fix this issue according to our instruction.
Understand the Waste Ink Counter and how to repair this
Before you look for the reason of the Waste Ink counter on Epson Stylus NX215 printer, you need to sure that your Epson printer has this problem or other same errors. You completely realize this problem based on these signals below.
The signals of Epson Stylus NX215 printer when it has Waste Ink Counter Overflow error
Let’s check your Epson Stylus NX215 printer carefully based on these steps below:
– When the printer suddenly stops working, it may seem that your printer is having Waste Ink Counter Overflow but there are a lot of others such as paper jam.
– Make sure by checking the Epson Stylus NX215 printer’s LCD screen in case you have and also you can check the problem message on the computer, if you see “The Printer’s Ink Pad is at the end of its service life. Please contact Epson Support” or “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support”, your Waste Ink Counter is overflowed.
– I think you should download WIC RESET TOOL which is called Epson Stylus NX215 Resetter then read the index of the Waste Ink Counter by clicking the button “read waste counters”.
What is Epson Stylus NX215 Waste ink pad? What is Epson Stylus NX215 Waste ink counter?
Epson inkjet printers have inside a part of sponge for absorbing and collecting waste inks. It is called waste ink pad.
Ink is collected by waste ink pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs. While printhead cleaning process ink flush through printhead to waste ink pad.
So one time it can be overflowed because it could not absorb ink anymore then the ink will leak from the bottom of the Epson Stylus NX215 printer.
The printer counts how much ink flow to waste ink pad and stores this number into printer’s memory.
This number is called Protection Counter or Waste Ink Counter.
What is Epson Stylus NX215 Waste ink counter overflow?
To prevent ink leaking outside the Epson Stylus NX215 printer from Waste ink Pad, the waste ink counter may be overflowed and printer will stop.
Full waste ink counter is 100%. Overflow means that counters values are more than 100%. If one and also two counters are overflow – you can’t print – you have to RESET WASTE INK COUNTERS
The overflowing ink can make the printer dirty and be broken down so the waste ink tray prevents this problem by this flowing process, before the waste ink is full and can be overflowed, the waste ink counter overflow to guarantee the printer’s safety.
So when the waste ink counter is full, you can’t print anymore and you will receive the notification about the full waste ink counter.
There are a lot of waste ink counters in Epson Stylus NX215 printer therefore if one of them is more than 100%, the printer will stop printing and all you need is resetting the waste ink counter back to 0% as well as clean the waste ink tray.
How to prevent the waste ink pad overflowing.
After you reset the waste ink counter back to 0% many times and the printers will go on working and let the waste ink flow into tray so the waste ink tray will be full soon and then overflow. This problem affect directly to printer so you need an useful solution to avoid the waste ink pad overflowing.
The first way: After resetting the waste ink counter, you should disassemble the waste ink pad and use the device to take all the waste ink the clean the waste ink pad to contain the waste ink.
But when you use this way, you should be open the printer regularly so it is inconvenient so you should see the next method to prevent this problems.
The second way: you can use a bottle and a segment conductor is suitable with the Epson Stylus NX215 printer’s conductor then let the waste ink flow into the conductor that is connected with the bottle
When the bottle is full, you only need to the segment conductor and clean it to reuse.
Note: Let’s set the bottle under the printer to make the flowing process fluently. If you put the bottle higher than the bottom of the Epson Stylus NX215 printer, the waste ink will not flow out
How to reset Epson Stylus NX215 printer Waste ink counter
Step 1: Download Epson Stylus NX215 resetter and install
You can download by select one of these links:
– Download Epson Stylus NX215 resetter for Windows (.zip): Download here
– Download WIC Reset Utility for Windows (.rar): Download here
– Download WIC Reset Utility for Windows (Mirror): Download here
or go to download page here: Download Epson Stylus NX215 Resetter
How to setup Epson Stylus NX215 resetter:
Step 1.1: Open Wicreset.exe file, click “Yes“, click “I accept the agreement“.
And now click “Next” to go to the next step
Step 1.2: Now, select distination location to setup Epson Stylus NX215 resetter. If you would like to select a different folder, click Browse then select a folder. If you want to install Epson Stylus NX215 resetter in default folder, click Next to continue
After that, click Next when “Select Start Menu Folder” window appears, if you don’t want to create a start menu folder click on “Don’t create a Start Menu folder“.
Step 1.3: Click to check “Create a desktop shortcut” then click Next to continue install Epson Stylus NX215 resetter
Step 1.4: Click Install to continue with the Epson Stylus NX215 Resetter installation
Please wait. Installation has completed installing Epson Stylus NX215 resetter on your computer when you see the Window: “Completing the WicReset Setup Wizard“
And this is WIC Reset Tool (Epson Stylus NX215 resetter)
Step 2: Buy the WIC Reset Key
You can buy the WIC RESET KEY with Paypal, VISA, Master Card and also Webmoney. ONE RESET KEY = $8.99 (This is One Time Reset Key)
Step 2.1: Click here to go to Buy Page, and also visit: https://resetkey.net/buy
Step 2.2: Enter the number of keys you want to buy in to Quantity box.
Step 2.3: Click on ADD TO CART button, then click Checkout with Paypal to pay the reset key and get the reset key from your email (You will receive the reset key in less than 10 seconds).
if you pay the reset key with Webmoney, please send money to WMZ Wallet: Z230787931543 then contact us (email@example.com) to get the reset key
Step 3: Instruction on how to reset your Epson Stylus NX215 printer’s Waste Ink Counters
Please watch this video to know step to steps to reset your Epson Stylus NX215 printer’s Waste ink counters by using Epson Stylus NX215 resetter (WIC Reset Tool.)
If you have any problem with Epson Stylus NX215 resetter, please don’t hesitate to contact us.