How to repaire Epson Stylus NX300 printer red light blinking and show the error “The printer’s ink Pads are at the end of their service life. Please contact the Epson Support” by using WIC Reset Tool (or Epson Stylus NX300 RESSETTER) and WIC RESET KEY.
The Waste Ink Counter Overflow is a common problem in the Epson Stylus NX300 printer as well as almost of Epson printer.
Most of them has this problem and let’s watch out some following signals. When your printer stops working and appear the message on the screen “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support” and the red light is continuously blinking.
Now you can conclude that your Epson Stylus NX300 printer is having the Waste Ink Counter Overflow however you can fix this issue according to our instruction.
What is the Waste Ink Counter on Epson Stylus NX300 Printer? How can you fix?
The users who use the Epson Stylus NX300 printer nearly got on with this error. Some of them waste a lot of money for fixing this error. However, you can fix it on your own in case it has this problem after you check your printer carefully.
How to know that the Waste Ink Counter printer is overflowed
These are 3 steps to sure that your Epson Stylus NX300 printer is overflowed and also not:
– When Waste ink counter is overflowed, two red lights of the printer will blink continuously.
– Check the notifications of the computer if you see “The Printer’s Ink Pad is at the end of its service life. Please contact Epson Support” and also “The Printer’s Ink Pads are at the end of their service life. Please contact Epson Support” that means your waste ink counter is overflowed, you have to reset it back to 0% to continue using.
– Let’s download Epson Stylus NX300 Resetter and also WIC RESET TOOL then connect with the computer by USB cable, connect computer to the internet, then choose the Epson Stylus NX300 printer on the Wicreset’s left sidebar then click “Read Waste Counters” to check the number of Waste Ink Counter. In case one of them is more than 100% that means your Waste Ink Counter is overflowed.
What is Epson Stylus NX300 Waste ink counter? What is Epson Stylus NX300 Waste ink pad?
Waste Ink Pads are actually a number of porous pads in the Epson Stylus NX300 printer that collect, distribute, and very importantly contain the ink that is not used on printed pages (Waste Ink).
Waste Ink is collected by these pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs.
So one time it can be overflowed because it could not absorb ink anymore then the ink will leak from the bottom of the Epson Stylus NX300 printer.
The printer counts how much ink flow to waste ink pad and stores this number into printer’s memory.
This number is called Protection Counter or Waste Ink Counter.
What is Epson Stylus NX300 Waste ink counter overflow?
To avoid ink leaking outside the Epson Stylus NX300 printer from Waste ink Pad, the waste ink counter may be overflowed and printer will stop.
Full waste ink counter is 100%. Overflow means that counters values are more than 100%. If one and also two counters are overflow – you can’t print – you need to RESET WASTE INK COUNTERS
The overflowing ink can make the printer dirty and be broken down so the waste ink tray prevents this problem by this flowing process, before the waste ink is full and can be overflowed, the waste ink counter overflow to guarantee the printer’s safety.
So when the waste ink counter is full, you can’t print anymore and you will receive the notification about the full waste ink counter.
There are a lot of waste ink counters in Epson Stylus NX300 printer therefore if one of them is more than 100%, the printer will stop printing and all you need is resetting the waste ink counter back to 0% as well as clean the waste ink tray.
How to prevent the waste ink pad overflowing.
If you use the Epson Stylus NX300 printer regularly, this problem will usually happen in your Epson printer so you should use some skills in resetting process to avoid overflowing waste ink.
The professional method: you can create an open bottle that contains the waste ink to help it can contain more waste ink. Let’s see the picture below:
But you should be have some tools and your creativity. If you can’t do this, you can use this following way.
This way is very simple, when you reset the waste ink counter, you can dissemble the top of the waste ink tray then take the waste ink out, if you can let’s dissemble the sponge and clean it.
You also buy a new waste ink pad to replace.
The disadvantage of this way is you can forget to clean waste ink pad so the ink can be overflowed. This can be bad effect to the components of the Epson Stylus NX300.
How to reset Epson Stylus NX300 printer Waste ink counter
Step 1: Download Epson Stylus NX300 resetter and setup
You are able to download by click on one of the links:
– Download Epson Stylus NX300 resetter for Windows (.zip): Download here
– Download Epson Stylus NX300 resetter for Windows (.rar): Download here
– Download Epson Stylus NX300 resetter for Windows (Mirror): Download here
or go to download page here: Download Epson Stylus NX300 Resetter
How to install WIC Reset Utility:
Step 1.1: Open Wicreset.exe file, click “Yes“, click “I accept the agreement“.
After that click “Next” to continue
Step 1.2: Now, select distination location to install Epson Stylus NX300 resetter. If you would like to select a different folder, click Browse then select a folder. If you want to install Epson Stylus NX300 resetter in default location, click Next to continue
Then, click Next when “Select Start Menu Folder” window appears, if you don’t want to create a start menu folder click on “Don’t create a Start Menu folder“.
Step 1.3: Click to check “Create a desktop shortcut” then click Next to continue install Epson Stylus NX300 resetter
Step 1.4: Click Install to continue with the Epson Stylus NX300 Resetter installation
Please wait. Setup has finished installing Epson Stylus NX300 resetter on your computer when you see the Window: “Completing the WicReset Setup Wizard“
And this is WIC Reset Tool (Epson Stylus NX300 resetter)
Step 2: Buy the WIC Reset Key
You can buy the WIC RESET KEY with Paypal, VISA, Master Card or Webmoney. ONE RESET KEY = $8.99 (This is One Time Reset Key)
Step 2.1: Click here to go to Buy Page, or visit: https://resetkey.net/buy
Step 2.2: Enter the number of keys you want to buy in to Quantity box.
Step 2.3: Click on ADD TO CART button, then click Checkout with Paypal to pay the reset key and get the reset key from your email (You will receive the reset key in less than 10 seconds).
if you pay the reset key with Webmoney, please send money to WMZ Wallet: Z230787931543 then contact us (firstname.lastname@example.org) to get the reset key
Step 3: How to reset your Epson Stylus NX300 printer’s Waste Ink Counters
Please watch this video to know how to reset your Epson Stylus NX300 printer’s Waste ink counters by using Epson Stylus NX300 resetter (WIC Reset Tool.)
If you have any problem with Epson Stylus NX300 resetter, please don’t hesitate to contact us.